UTM Logo
UTM Tagline

Accepted Papers

Important Note:  
Papers will be published in the Conference Proceeding only if:
1.  Author has registered and make the full payment, and
2. One Corresponding author at least signed Copyright form.
3.  Author presented the papers during the conference.
Papers that did not meet the above criteria will not be published in our conference proceeding.
Last Update: April 2, 2013 09:00AM

Track:

 

#

Track / Authors, Title
TOP
 Payment computer science

285

Nicholas Akosu and Ali Selamat. Enhancing the Effectiveness of the Spelling Checker Approach for Language Identification

354

Hassan Khastavaneh and Siti Mariyam Shamsuddin. Moving Object Segmentation in Video Sequences using Vector Quantization

362

Mahdi Maktabdar Oghaz, Seyed Hadi Yaghoubyan and Mohd Aizaini Maarof. A botnet Detection Algorithm Using Simultaneous DNS Traffics

365

Hamza Awad Hamza Ibrahim and Sulaiman Mohd Nor. A Skype ML Datasets Validation and Detection Mechanism Using Machine Learning Approach

409

Thabit Sabbah and Ali Selamat. Thesaurus Performance with Schema Matching

301

Syed Zainudeen Mohd Shaid and Mohd Aizaini Maarof. Malware Behaviour Visualization

404

Ali Najafi and Robert Tiong. Productivity Analysis of Precast Concrete Installation by Artificial Neural Networks

118

Khalil Azha Mohd Annuar, Shahrul Hamzah Abdul Razak, Jessnor Arif Mat Jizat, Hasrul Che Shamsudin, Amar Faiz Zainal Abidin, Nur Anis Nordin, Mohamed Faisal Abdul Waduth, Nur Asmiza Selamat, Siti Fadilah Abd Latip, Khairil Azwa Mohd Nor, Sigit Widiyanto, Hadyan Mardhi Fadillah and Mohd Fitri Alif Mohd Kasai. A Preliminary Study on Camera Auto Calibration Problem Using Bat Algorithm

147

Aliyu Mohammed, Sulaiman Mohdnor and Muhammad Nadzir Marsono. Overview of Bayesian Belief Network for Malware Risk Analysis on the Campus Network

386

Sharanjit Dhillon, Roliana Ibrahim and Ali Selamat. Portal Requirements For Senior Citizens Based On Conceptual Knowledge Sharing Framework

395

Mohammad Taghi Kheirabadi and Mohd Murtadha Mohamad. Pressure Routing Protocols in Underwater Acoustic Sensor networks: A survey
 

413

Mohammad Babrdel Bonab and Nor Erne Nazira Bt Bazin. Data Clustering by Combining the K-means and ICA Algorithms

477

Hanan Alghamdi and Ali Selamat. The Hybrid Feature Selection k-means Method for Arabic Webpage Classification

482

Nasrin Badie, Ab Razak Che Hussin and Halina M. Dahlan. Repudiation Factors of Adopting Cloud Computing in University Adminstration

511

Shaffika Mohd Suhaimi, Norazah Yusof and Nadirah Mohamad. Knowledge construction for wiki education applied in Moodle 2.3
TOP
Electrical Engineering
 

20

Garba Aliyu, Saiflunizam Bin Abd. Khalid and Jafar Usman. A NEW IMPROVED WALSH FUNCTION ALGORITHM FOR ACTIVE AND REACTIVE POWER MEASUREMENT
 

48

Jafaru Usman, Mohd Wazir Mustafa, Garba Aliyu and Bukar Umar Musa. Coordinated AVR-PSS for Transient Stability using Modified Particle Swarm Optimization
 

100

Mohammad Javad Kiani, Mohammad Taghi Ahmadi, Mahmoud Zadehbagheri, Askar Bagherinasab and Fauzan Che Harun. Resistance Analysis in Bilayer Graphene Based-FET Channel
 

117

Askar Bagherinasab, Saifulnizam Abdul Khalid, Mahmoud Zadehbagheri, Mohammad Javad Kiani, Majid Gandomkar and Naziha Ahmad. Optimal Placement of D-STATCOM By Genetic Algorithm to Losses Reduction
 

129

Mohd Taufiq Mohd Khairi, Sallehuddin Ibrahim, Mohd Amri Md Yunus and Mohd Najmi Mohd Sulaiman. Optical Tomography Sensor Configuration for Estimating the Turbidity Level of Water

180

Muhammad Gary Shafer, Farah Ramadhani and Kamalrulnizam Abu Bakar. Dual Demand Side Management (2DSM) Method in Optimizing Utilization of Available Power
 

181

Nurul Shuhada Ahsan, Mohd Shahril Salleh, Fairuz Abdullah and Almsafir Mahmoud Khalid. Migration strategy from Legacy PON System into Next Generation PON System for low CAPEX TELCO deployment in Malaysia
 

206

Ahmad ‘Athif Mohd Faudzi, Omer F. Hikmat, Mohamed O. Elnimair and Khairuddin Osman. PI Adaptive Neuro-Fuzzy and Receding Horizon Position Control for Intelligent Pnuematic Actuator
 

211

Aree Wangsupphaphol, Nik Rumzi Bin Nik Idris, Awang Bin Jusoh and Nik Din Bin Muhamad. Power Converter Design for Electric Vehicle Application
 

220

Nima Bahrami and Ameruddin Bin Baharom. Underwater Ambient Noise Analysis Base on Short Time Fourier Transform (STFT)
 

245

Michael David, Tay Ching En Marcus, Maslina Yaacob, Mohd Rashidi Salim, Mohd Haniff Ibrahim, Sevia Mahdaliza Idrus, Asrul Izam Azmi and Nor Hafizah Ngajikin. Experimental Structures for Ozone Gas Detection Using Absorption Spectroscopy: An Overview
 

304

Farah Diana Muhammad and Mohd. Zamani Zulkifli. High resolution interrogation system for Fiber Bragg grating (FBG) sensor application using radio frequency spectrum analyzer
 

332

Meisam Rahmani, Razali Ismail, M. T. Ahmadi and Komeil Rahmani. Low Power Trilayer Graphene Nanoribbon Schottky-Barrier FET Model
 

338

Zul Hasrizal Bohari and Yasmin Hanum Md Thayoob. Feature Analysis of Numerical Calculated Data from Sweep Frequency Response Analysis (SFRA) Traces Using Self Organizing Maps

377

Syarfa’ Zahirah Sapuan, Alireza Kazemipour and Mohd Zarar Mohd Jenu. Issues on Calibration of Direct Feed Biconical Antenna In a Semi-Anechoic Chamber Using Standard Antenna Method
 

379

Houman Omidi, Hashem Ahmadi, Mehrdad Mokhtari, Mehran Khosravifard and Nor Asiah Muhamad. Impact Evaluation of 2011 Significant Events on Iran Energy Sector
 

393

Askar Bagherinasab, Saifulnizam Abdul Khalid, Hadi Jahangere, Mohammadjavad Kiani, Mahmod Zadebagheri and Alireza Yousefpour. Optimal DG placement in distribution networks using Shuffled Frog Leap Algorithm
 

405

Mozhde Heydarianasl, Mohd Fua’Ad Rahmat, Shadab Dabagh and Fahimeh Ahmadi. Application of Pyroelectric sensors for Detection of Continuous Infrared Radiation
 

410

Mehrdad Mokhtari, Zulkurnain Abdul-Malek, Mehran Khosravifard, Hashem Ahmadi and Houman Omidi. The Effects of Lightning Current Parameters on the Residual Voltage of ZnO Lightning Arrester with High Frequency Ground Model
 

418

Muhammad Nizam Kamarudin, Abdul Rashid Husain and Mohamad Noh Ahmad. Stabilization of Uncertain Systems using Backstepping and Lyapunov Redesign
 

432

Siti Hajar A Rahman, Sevia Mahdaliza Idrus and Farah Diana Mahad. Hybrid Optical Amplifiers with WDM System
 

475

Mas Elyza Mohd Azol, Rashidah Arsat and Nafarizal Nayan. Annealing effects on surface morphology of Zinc Oxide thin film using RF Magnetron Sputtering
 

481

Shahrulnizahani Mohammad Din, Ruzairi Abdul Rahim and Leow Pei Ling. Electrical Field Simulation for Segmented Excitation of Electrical Capacitance Tomography.
 

512

Nurul Ashikin Abdul Kadir, Norlaili Mat Safri and Mohd Afzan Othman. Feasibility Study of Semantic Mining for Predicting the Onset of Atrial Fibrillation

513

Nur Alyaa Diyana Ahmad Mufit and Mohamad Zoinol Abidin Abd Aziz. Design X-Circular Polarized with Slanted Rectangular Slot by using Single Port
 

525

Husnaini Azmy and Norlaili Mat Safri. EEG Based BCI using Task-dependent Conditions for Robot Control
 

527

Fauzan Ahmad, Sulaiman Wadi Harun and Harith Ahmad. Single-walled Carbon Nanotubes Polymer Composite Based Saturable Absorber for Passive Mode-Locking Fiber Laser
 

528

Md Razak Daud, Azli Yahya, Syahrullail Samion, Nazriah Mahmud, Nor Liyana Safura Hashim and Kartiko Nugroho. Machining pits on the acetabular surface via Electrical Discharge Machining process
 

532

Nur Syazana Azahar, Nurbaya Zainal and Fauzan Khairi Che Harun. Investigation Of Graphene Composite Based Gas Sensor For Electronic Nose Application
 

539

Nazriah Mahmud, Azli Yahya, Trias Andromeda and Nor Liyana Safura Hashim. Design and implementation of flyback converter for Electrical Discharge Machining power generator
 

543

Nor Liyana Safura Hashim, Azli Yahya, Nazriah Mahmud, Kartiko Nugroho, Md Razak Daud and Trias Andromeda. Review & Simulation Studies of Electrical Discharge Machining Servomechanism Controller
 

553

Nur Aishah Zainuddin and Mohamad Zoinol Abidin Abd Aziz. Investigation Of Dual Meander Slot To Microstrip Patch Antenna
 

570

Mohamad Harris Misran, Maizatul Alice Meor Said, Mohd Azlishah Othman, Mohd Muzafar Ismail, Hamzah Asyrani Sulaiman and Ridza Azri Ramlee. RFID based Medical Database System
 

600

Abdelrahman Alnajjar and Dr. Ahmad Safawi Mokhtar. Design and performance analysis of a model predictive controller for STATCOM to improve the stability of a single machine infinite-bus.
 

604

Mahfuzah Md.Shukor. Design 3.5 Antenna using Coplanar Waveguide (CPW) for Dual Band Applications
TOP
Mechanical Engineering
 

592

Wani Udin and Anuar Ahmad. Unmanned Aerial Vehicle Technology for River Bed Mapping
 

451

Roozbeh Alipour, Izman Bin Sudin and Mohed. Nasir Bin Tamin. A Novel Method For Investigating of Effective Parameters on Charge Mass in Explosive Forming Process

558

Mohammadreza Arjmandi, Muhammad Adil Khattak and Mohd Nasir Tamin. Delamination failure analysis of carbon fiber-reinforced polymer (CFRP) composites
 

333

Nor Azizi Mazalan, Azlan Ab Malek, Mazlan Abdul Wahid and Musa Mailah. Neural Network Modeling For Main Steam Temperature System
 

417

Zulhasni Abdul Rahim and Nooh Abu Bakar. Implementation Framework of Design-To-Cost Using TRIZ Tools in Product Concept Design in Automotive Industry
 

425

Adi Maimun, Mehdi Nakisa, Yasser M. Ahmed, Fatemeh Behrouzi, Ahmed Fuaad, Agoes Priyanto and K. Jaswar. Observation of the 3D flow around a propeller in confined water
 

493

Mohamad Syauqy Amin Othman and Zaini Ahmad. Crashworthiness of Frontal Longitudinal of Rain Forest Vehicle (RFV)
 

179

Nurul Saadah Yusof, Jamaludin Mohd. Taib, Afandi Dzakaria and Mohd Kasim Abdul Jalil. Optimization the shortest distance between two specified locations of B-spline curve
 

415

Amir Sidek and Rashidah Arsat. Sintering Temperature Effect on Surface Morphologies of Inkjet Printed Nanosilver
 

133

Nur Syamimi Jiran, Muhamad Zameri Mat Saman and Noordin Mohd Yusof. Life Cycle Costing of the Membrane System for Wastewater Treatment: A Review and Further Research
 

351

Tengku Nur Azila, Muhamad Zameri Mat Saman and Safian Sharif. Development of framework for establishment of end-of-life vehicles management system in Malaysia: review and research direction
 

380

Alireza Khademi, Seyedeh Sabereh Hosseini, Seyed Ali Mirzapour, Shahab Khademi, Alireza Rangraz Jeddi, Noordin Mohd Yusof and Jafri Mohd Rohani. Taguchi Design of Experiments Application on Determining Speed Bump Location
 

403

Nasuha Lee Abdullah, Khairur Rijal Jamaludin and Hayati Habibah Abdul Talib. Assessing Impact of Operational Complexity on Quality Management Practices in Malaysia’s Electrical and Electronics Manufacturing Industry
 

466

Mohd Al-Fatihhi Mohd Szali Januddi, Ardiyansyah Syahrom Syahrom, Muhamad Noor Harun and Muhammad Rafiq Abdul Kadir. The Effect of Combined Compression-Torsion Strain Rates on Trabecular Bone Ultimate Properties
 

487

Mohammad Gohari, Mona Tahmasebi and Suhail Kazi. Structure Isolation of Base Excitation by Active Force Control Method
 

494

Dr Agoes Priyanto and Muhammad Waqiyuddin Salleh. Designing forward V-shaped LNG Hull Form for Fuel Economy

504

Hamidreza Bakhsheshi Rad, Mohd Idris and Mohammed Abdul Kadir. Effect of Fluoride Conversion Coating on Corrosion of Behavior of Mg-Ca-Zn Alloy
 

507

Roseni Abdul Aziz, Mat Rebi Abdul Rani, Jafri Mohd Rohani and Adeyemi Ademola James. ASSOCIATION BETWEEN WORKERS PERCEPTIONS AND THEIR LEVEL OF SATISFACTION WITH THE WORKING ENVIRONMENT IN THE MANUFACTURING INDUSTRY
 

584

Kasra Naderian, Intan Zaurah Mat Darus, Yaser Sabzehmeidani, Mohamed Hussein and Armin Ghanimi. Kinematic and Dynamic Analysis of Pneumatic and Flexible Tire

619

Seyed Alireza Ghazanfari and Adi Maimun. Resistance And Lateral Force On The Autonomuse Underwater Vehicle
 

201

Ghasem Rezaei, Ashkan Memari, Seyed Mojib Zahraee, Foroogh Khosravi and Prof. Dr. Awaluddin Bin Mohamed Shaharoun. INNOVATIVE METHOD FOR SCALING OF INFORMATION ASSETS IN THE MANUFACYURING ORGANIZATIONS
 

343

Firdaus Ghani. Development of Cubic-Motion
 

426

Hirbod Maleki Kheimeh Sari, Mehran Abrishamkar, Ali Karandish and Izman Bin Sudin. Basic Modules Of Integrated Cad/Cam/Process Planing For Die-Design And Sheet-Metal Stamping
 

460

Ali Derakhshan Asl, Hamed Piroozfard, Kuan Yew Wong, Vahid Abbasgholipour, Mohamad Abbasgholipour and Ali Hosseingholipourasl. An Intelligent Genetic Algorithm for Flexible Job Shop Scheduling Problems
 

469

Mohsen Kamrani, Shahab Sariatmadari, Reza Hassanzadeh Abbasabadi, Noordin Mohd. Yusof and Jafri Mohd. Rohani. Improving customer waiting time by using Six Sigma methodology
 

495

Habiballah Safari, Safian Sharif and Izman Sudin. Machined surface quality considerations during high speed dry end milling of Ti-6Al-4V alloy
 

574

Mona Tahmasebi, Mohammad Gohari, Musa Mailah and Roslan Abd Rahman. Self-Tuning PD Controller of a Sprayer Boom Structure Using Neural Network
 

583

Somia Alfatih, Mohamed Salman Leong, Ahmed Abdelrahman and Mohamed Elnaeim. A Review of the Application of Higher Order Spectral Analysis for Machinery Vibration Faults Detection in Rotating Machinery
 

634

Simon Kaka and Musa Mailah. A Method to Compute the Dimension of An Air Distribution Channel of A Pneumatic Cylinder
 

635

Hazir Farouk Abdelraheem, Mohammad Nazri Mohd Jaafar, Tirto Prakoso and Sabir Mohammed Salih. Biodiesel production from Crude Jatropha Oil (CJO) in pilot plant

42

Venkatesan Saradha Paramashivaiah, Arravind Rajan, Vadivel Duraiswamy, Dr.Palaniswamy Eshwaran, Balamurugan Shantha and Velmurugan Govindan. FLUTTER ANALYSIS OF COMPOSITE PLATE STRUCTURE WITH AEROELASTIC TAILORING
 

324

Elham Hasani, Mohammad Hossein Mohammadi Ashnani and Anwar Johari. Towards System for Health, Safety and Environmental Risk assessment in Iron manufacturing
 

367

Ahmad Qushairi Mohamad, Ilyas Khan, Zulkhibri Ismail and Sharidan Shafie. THE UNSTEADY FREE CONVECTION FLOW OF SECOND GRADE FLUIDS IN A VERTICAL ROTATING FRAME

390

Afshin Aslian and Ariffin Bin Abd Razak. INVENTION THROUGH INTEGRATION OF TRIZ AND DFMA METHODOLOGIES

610

Mohammad Mahdi Davoudi, Mohammadreza Arjmandi and Mohd Nasir Tamin. Plastic and collapse load analysis of eccentric notched beam using finite element method
 

360

Ali Karandish, Hirbod Maleki Kheimeh Sari, Mehran Abrishamkar and Khidzir Bin Zakaria. CAD/CAM system for plastic injection mold manufacturing
TOP
Civil Engineering
 

5

Hamzeh Dehghani and Mansour Nikpour. Nonlinear Analysis of Space Trusses Using a New Method
 

6

Mohammad Ahmadi and Suhaimi Abu Bakar. Percentage of Material Consumption of RC Frame With and Without Shear Wall Based On Pushover Analysis
 

96

Nor Maslina Mohsan, Arizu Sulaiman and Mahmood Md. Tahir. Compressive Strength And Buckling Behaviour Of Perforated Slender Lipped Channel Columns

101

Zanariah Jahya, Zaiton Haron and Mardhiah Zainal Abidin. Noise Level From A Construction Site: Measurement Vs. Prediction
 

110

Taha Mehmannavaz, Salihuddin Radin Sumadi, Muhammad Aamer Rafique Bhutta, Mostafa Samadi, Seyed Mahdi Sajjadi and Koohyar Faizi. Lightweight mortar incorporating various percentages of POFA and PFA
 

114

Abdulrahman Salawu and Mohammad Ismail. Assessment of an inhibited reinforced concrete subjected to accelerated carbonation.
 

120

Hoong-Pin Lee, Abdullah Zawawi Awang and Wahid Omar. Behaviour of Steel Strapping Tensioning Technique (SSTT) Confined High-Strength Concrete with Different Lateral Pre-tensioning Stresses
 

122

Abdul Kadir Bin Marsono, Ali Tighnavard Balasbaneh and Khairulzan Yahya. Life cycle assessment of two different IBS of Recipe Endpoint (E) LCIA method
 

131

Nur Hafizah A.K., Jamaludin M.Y., Bhutta M.A.R., Husin M.W., Mohammad Ismail and Azman M.. Tensile Properties of Kenaf Fiber Reinforced Polymer Composites

138

Mardhiah Zainal Abidin, Zaiton Haron, Zanariah Jahya, Kamilah Mohd Said and A. Aziz Saim. Determination of Occupational Noise Exposure and Use of Hearing Protection among Construction Workers
 

203

Somaieh Hatami, Redzuan Abdullah and Abdul Kadir Marsono. Parametric Study of Concrete Load Bearing Wall with Opening for Double Storey Houses
 

235

Sepehr Alerasoul, Soheil Alerasoul, Bachan Singh and Iman Kiani. CONSULTANCY SERVICES IN THE MIDDLE EAST CONSTRUCTION INDUSTRY
 

239

Shantha Kumari Muniyandi and Siti Suhaila Mohamad. POTENTIAL REUSE OF RECOVERED NONMETALLIC PRINTED CIRCUIT BOARD WASTE
 

240

Nurul Hidayah Roslan, Taliat Ola Yusuf and Mohammad Ismail. Evaluation of By-Product from Steel Industry as Cement Replacement
 

276

Fung-Lung Chang, Haryati Yaacob and Mohd. Rosli Hainin. Performance on Stability and Flow of Single Face Compacted Asphalt Specimen
 

328

Lyn Dee Goh, Azlan Abd. Rahman, Norhisham Bakhary and Baderul Hisham Ahmad. Modal Parameters and Their Influential Factors in A Prestressed Concrete Panel

336

Kamilah Mohd Said, Zaiton Haron, Mardhiah Zainal Abidin and A. Aziz Saim. Noise Exposure Level of Roadway Construction Worker
 

337

Milad Jajarmizadeh, Sobri Harun, Shamsuddin Shahid and Mohsen Salarpour. Comparison of retention parameter computation methods in SWAT for stream flow prediction in an arid region

339

Azlan Bin Adnan, Abdul Rahman Bin Mohd Sam and Mohammadamin Azimi. Damping Coefficients α & β for Structures with Large Degrees of Freedom
 

356

Aidin Nobahar Sadeghifam, Mahdi Moharrami Meynagh, Dr. Umit Isikdag and Abdul Kadir Bin Marsono. BIM Application for Energy Optimization in a Tropical Public Building
 

357

Aidin Nobahar Sadeghifam, Amin Fakhkhar Zadeh, Mahdi Moharrami Meynagh and Abdul Kadir Bin Marsono. Energy Efficient Residential Buildings Assessment Using Building Information Modeling
 

358

Mohsen Salarpour, Zulkifli Yusop, Milad Jajarmizadeh, Shamsuddin Shahid and Fadhilah Yusof. A Generalized Feed Forward Network for the Prediction of Runoff in Johor River Basin

361

Samera Samsuddin Sah. ASSESSMENT OF WATER QUALITY CONDITION DURING STORM AND BASE FLOW EVENTS IN SUNGAI PERAK
 

389

Ardalan Sabamehr and Leila Soufeiani. Computer simulation of bridge girder reinforced with FRP
 

443

Mehran Gholami, Abdul Rahman Mohd Sam, Jamaludin Mohamad Yatim and Bahram Marabi. Effect of Environmental Factors on Steel Structures Strengthened with Carbon Fiber Reinforced Polymer

549

Seyed Esmaeil Mohammadyan Yasouj, Mahdi Moharrami Meynagh and Abdul Kadir Bin Marsono. Reinforced Concrete Beam’s Contribution On Sustainable Building
 

77

Zulkarnain Hassan, Supiah Shamsudin and Sobri Harun. Runoff Modelling in Northern Peninsular Malaysia using ANN

119

Hamed Adab, Azadeh Atabati and Ali Khazaei. Statistical downscaling of temperature and rainfall data simulated by a stochastic weather generator
 

258

Iman Kiani, Mohammad Mir Ghasemi, Sepeher Alerasoul, Saeid Khalili Ghomi and Bachan Singh. The Barriers and Implementation of Building Information Modeling (BIM) based on Integrated Project Delivery (IPD) In the Construction Industry
 

8

Khitam Saeed and Khairul Kassim. Evaluation the compressive strength of stabilized cement-based kaolinite clay contaminated by Copper and Zinc
 

121

Hossein Shad and Azlan Adnan. An investigation on the effectiveness of Tuned Mass Damper (TMD) in suppressing the displacement response of a 5-storey building under harmonic load
 

148

Ameer Khudhair and Tony Hadibarata. Removal of pyrene by Candida sp1 fungus isolated from nature
 

98

Rawshan Ali and Arien Heryansyah. THE STUDY OF WATERSHED RETENTION APPROACH FOR IDENTIFY WATER RESOURCES PROBLEMS AT JOHOR WATERSHED
 

142

Farshad Zahmatkesh, Pezhman Taghia, Mohd Hanim Osman and Elnaz Talebi. Comparative study on thermal behavior of slant endplate connections under symmetric and non-symmetric gravity load

156

Navid Saeidi Rezvani and Seyed Mostafa Razavi. Study and Analysis of the Issues Associated with Pedestrianism and Pedestrians Damage Control and Proposing Implementation Methods
 

158

Hesam Kamyab, Ponraj Mohanadoss, Mohd Fadhil Md Din, Shaza Eva Mohamad, Shahabaldin Rezania and Mohsen Sohrabi. ENVIRONMENTAL ASPECT OF BIODIESEL PRODUCTION FROM MICROALGAE – CHLORELLA SOROKONIANA
 

254

Morteza Mohsenipour and Shamsuddin Shahid. The impact of chemical compositions of kaolin on the adsorption of heavy Metals

257

Hoang-Hung Tran-Nguyen, Tho Thanh Le and Thang Huu Ly. A Field Trial Study on Jet Grouting to Improve the Subsoil in Ho Chi Minh City, Vietnam
 

288

Mutah Musa, Akira Kikuchi, Jafariah Jaafar, Zaiton Abdul Majid and Nor Eman Ismail. Production optimization of sugarcane bagasse activated carbon for Cd (II) removal
 

363

Mehdi Raftari, Prof. Dr. Khairul Anuar Kassim, Dr. Ahmad Safuan A.Rashid and Hossein Moayedi. Settlement Behaviour of Shallow Foundation on Reinforced Slopes in Lorestan Province, Iran
 

378

Seyed Mahdi Sajjadi, Mohd Zulkifli Bin Mohd Yunus, Othman Bin Che Puan and Taha Mehmannavaz. Investigation Of Various Techniques Of Soils Stabilization In Different Conditions
 

392

Seyed Mehrdad Ghaemi and Mohammadali Sahraei. Determining the Impact of Road Humps on Road Capacity
 

396

Leila Soufeiani and Ardalan Sabamehr. Investigation in to dynamic analysis of fiber reinforced composite slab
 

399

Noor Hasyimah Rosman and Aznah Nor Anuar. Treatment of Rubber Wastewater using Aerobic Granular Sludge in a Sequential Batch Reactor

408

Peiman Roushenas and Zohreh Majidnia. MAGNETIC NANOPARTICLE FOR REMOVAL OF Pb (II) EFFLUENT IN WASTE WATER
 

442

Wan Nur Fazlina Abdol Jani, Fatihah Suja’ and Firdaus M.H. Evaluation of Surface Water Quality in a Port in Malaysia
 

462

Mohammadali Sahraei and Seyed Mehrdad Ghaemi. Influence of Height and Distance of Traffic Noise barriers for Noise Mitigation
 

476

Hooman Abadi, Poona Abadi and Rouzbeh Abadi. THE CHALLENGING OF IMPLEMENTATION ORGANIZATIONAL CULTURE IN TODAY’S CONSTRUCTION INDUSTRY
 

508

Behruz Andalibizadeh and Seyedmohsen Hosseini. Using Constractability for Commercialization of New Academic Ideas to Improve and Redesign Sustainable Construction by SMEs
 

518

Zee Chuang Teh. Naphthalene metabolism by white rot fungus Pleurotus eryngii F032- Identification of naphthalene metabolites
 

545

Mohammad Rezaeianpakizeh and Azlan Bin Adnan. Effects of in-fill masonry walls and soft story on the seismic performance of buildings
 

547

Yousef Karimi Vahed and Azlan Adnan. Earthquake Effects on Steel Storage Tanks
 

548

Mahdi Moharrami Meynagh, Adeyemo David Olusegun, Yousef Karimi Vahed and Abdul Kadir Bin Marsono. Implementing Lean Production Principles Into The Nigerian Construction Industry
 

562

Mahdi Hatami, Hossein Moravej and Sophia C.Aliah. Effects of increasing distance of columns in RC water storage tanks
 

568

Rubiyatno Rubiyatno and Tony Hadibarata. Screening of White-rot Fungi for Decolorization Mordant Orange-1

622

Payam Nejat, Muhd Zaimi and Fatemeh Jomehzadeh. Perspective of Renewable energy projects performed in Iran Capacities and obstacles
 

631

Babak Farmanbordar, Azlan Adnan, Iman Faridmehr and Reza Hodjati. Evaluation of Isolated Nucear Power Plant Under Seismic loads
 

638

Yulia Setiani and Prof Muhd Zaimi Abd Majid. An Analysis of Labor Productivity Growth Rate and Fatal Occupational Injuries in Construction Industry among Asian Countries
 

642

Elham Khosrowabadi and Fahrul Huyop. Molecular Analysis of 2, 2- Dichloropropionate Degrading Bacterium Isolated From Marine Sediment Using 16S rRNA Method
TOP
Chemical Engineering
 

9

Bemgba Bevan Nyakuma, Arshad Ahmad, Anwar Johari and Tuan Amran Tuan Abdullah. Thermogravimetric analysis of the fuel properties of Empty Fruit Bunch briquettes
 

373

Shafirah Samsuri and Mazura Jusoh. Fin Efficiency of Spiral Finned Crystallizer for Progressive Freeze Concentation System
 

374

Noor Naimah Mohamed Nor and Mazura Jusoh. Progressive Freeze Concentration of Coconut Water: Effect of Circulation Flowrate and Circulation Time
 

435

Roslina Rashid and Nor Athirah Zaharudin. Enzymatic hydrolysis of used-frying oil using Candida rugosa lipase
 

485

Zaki Yamani Zakaria, Juha Linnekoski and Nor Aishah Saidina Amin. Thermodynamic Analysis of Glycerol to Ethylene
 

515

Yan Yan Farm, Awang Bono, Chi Ming Chris Chu, Norina Yadin and Nur Abidah Ramlan. Analysis of Liquid Phase Adsorption Isotherm of Non-Azeotropic Solution ontoActivated Carbon
 

529

Yahya Norshafika and Jusoh Mazura. Effect Of Flowrate And Circulation Time On Fractionation Of Refined Bleached And Deodorised Palm Oil Through Progressive Freeze Concentration
 

427

Khairilanuar Mohd Hanim, Qadly Ameen Pahlawi and Mohd Nazlee Faisal Md Ghazali. Separation of carotene from palm oil by organic solvent nanofiltration
 

371

Farah Hanim Ab. Hamid and Mazura Jusoh. Anti-supercooling Holes as a Physical Approach in Preventing Supercooling Phenomenon in Progressive Freeze Concentration
 

372

Nor Zanariah Safiei and Mazura Jusoh. Process Sequence Development for Automated Progressive Freeze Concentration System
 

375

Nurul Aini Amran and Mazura Jusoh. Friction Study on Vertical Finned Crystallizer for Progressive Freeze Concentration System
 

440

Siti Hanna Elias, Aznah Nor Anuar and Maketab Mohamed. Treating ceramic industrial wastewater – Comparison between Water Hyacinth and Water Lettuce performances
 

501

Farhana Abd Lahin, Rosalam Sarbatly and Emma Suali. Membrane Bioreactor for Wastewater Treatment using Microalgae
 

381

Teo Chee Loong and Ani Idris. Effect of different light wavelengths on the growth of marine microalgae
 

207

Mohd Fadhzir Ahmad Kamaroddin, Bemgba Bevan Nyakuma, Olagoke Abimbola Oladokun, Tuan Amran Tuan Abdullah and Nor Aishah Saidina Amin. Characterization of the fuel properties of Imperata cylindrica grass for thermal applications

407

Ani Idris, Zohreh Majidnia and Peiman Roushenas. Evaluation of silver oxide nanoparticles effect on antibacterial properties of
 

500

Anisuzzaman S.M, Awang Bono, Duduku Krishnaiah and Norazwinah Azreen Hussin. Effects of Extraction Process Conditions on Semi Refined Carrageenan Produced by Using Spray Dryer
TOP
Petroleum Engineering
 

90

Javed Akbar Khan Niazi and William King Soon Pao. Fill Removal from Horizental Well Using Foam in Coiled Tubing
TOP
Biomedical Engineering
 

416

Nasrul Humaimi Mahmood. Patient Monitoring System using Zigbee Wireless System: Preliminary Result
TOP
Built Environment
 

293

Yong Kum Weng. Malaysia Professional Architectural Practice: Roles and Responsibility of architect in certification
 

368

Elham Rahely Namin, Hamed Najafpour and Hasanuddin Lamit. Public Space as a Space for Social Urban Interaction: A Case Study of Johor Bahru, Malaysia.
 

437

Hesamaddin Sotoudeh and Wan Mohd Zakri Wan Abdullah. Preference of Experts and Non-Experts on Aesthetic Quality of New Infill Design in Urban Historical Context
 

347

Maliheh Noroozi, Syed Zainol Abidin Idid and Mohsen Ghasemi. Investigating Post-Earthquake Challenges in reconstruction of Traditional Earthen Houses in Historic City of Bam
 

26

Raymond Krishnan, Hamidah Ahmad and Sapura Mohamad. Native Plants Drought Tolerance Performance On Malaysia’s Tropical Extensive Green Roof

82

Mohd Hamdan Ahmad and Clement Oluwole Folorunso. COLOUR UTILIZATION AMONG THE YORUBAS OF SOUTHWEST NIGERIA: AN EMPIRICAL ANALYSIS
 

107

Mohsen Roshan and Mohd Zin Kandar. Investigating the performance of Anidolic Daylighting System in real climatic conditions in Malaysia

470

Amir Ghahramanpouri, Sepideh Sedaghatnia and Hasanuddin Lamit. Urban Social Sustainability; An Exploratory Review of Definitions and Trends in varied Urban Scales
 

516

Fatemeh Mozaffarighadikolaei and Dilshan Remaz Ossen. Applying Wing Wall in the Balcony Design to Improve the Indoor Ventilation Performance

519

Kayode Oloruntoba, Mold Rasidi and Ismal Said. Determining the prevailing effects among public space utilization factors in science cities: A study in Cyberjaya, Malaysia
 

281

Ojo Ayobami Kayode and Hairul Nizam Ismail. RESIDENTS’ SUPPORTS FOR VOLUNTOURISM: A Viable Approach to Rural Development.
 

463

Sepideh Sedaghatnia, Amir Ghahramanpouri and Hasanuddin Lamit. An Exploratory Review of Social Exclusion Concept and Its Effectiveness for Applying in Campus Environment
 

588

Fahimeh Malekinezhad and Hasanuddin Bin Lamit. Preference and Perception of Familiar Urban Sculptures in Designer and Non-designer Groups

593

Noradila Rusli and M. Rafee Majid. RETROFITTING RAIN BARREL AND BIORETENTION: A METHODICAL APPROACH IN MALAYSIA

112

Abd’Razack Nelson, Ahmad Nazri Bin Muhamad Ludin, Yusuf Agbu Ezekiel and M. An Appraisal of Relationship between Waste Generation and Management in Jalingo City, Nigeria.
 

208

Shaiful Bahri Aziz, Ahmad Raqib Ab Ghani and Muhammad Zaly Shah Muhammad Hussein. Passenger’s Perception for Service Quality of Iskandar Malaysia Bus (Social Route 1)
 

271

Raheleh Rostami, Seyed Meysam Khoshnava, Rasoul Rostami and Hasanuddin Lamit. Contribution of Historical Persian Gardens in Contemporary Urban Residents’ Life
 

349

Tabassom Safikhani, Mohammad Baharvand, Aminatuzuhariah Megat Abdullah and Dilshan Remaz Ossen. A Review on Vertical Greenery Systems Heat Reduction in Tropical Climate

491

Iraj Karimi, Sharifah.S.S Mahadzar and Bagoes Wiryomartono. Transformation Of Shiraz From Old Urban Form To Modern Urban Form
 

611

Tareq Farea and Dilshan Ossen. Effect of Lightwell Combined with Horizontal Void on Natural Ventilation in an Apartment Building
 

626

Hossein Motamed Chaboki, Majid Ansari and Ahmad Fauzi A. Wahab. Workplace Visibility and the Impacts on Informal Interaction

632

Mahboubeh Rakhshanifar, Fatemeh Taghvaee, Nasim Taheri and Mohammad Mahdi Hosseini. Study of integration of pedestrian movement and physical environment
 

65

Stephen Eluwa and Ho Chin Siong. Predicting The Drivers of Household Energy Consumption: A Developing Country Perspective
 

214

Nasiru Idris Medugu, M. Rafee Majid and Foziah Johar. Assessing Afforestation Programme towards Combating Desertification in Northern Nigeria
 

499

Shuhana Shamsuddin and Natasha Azim Hussin. Awareness by Kuala Lumpur City Hall staffs for successful implementation of Crime Prevention Through Environmental Design (CPTED)

533

Amir Bagherizadeh and Mohd Hisyam Rasidi. The Concept of Knowledge City
 

613

Lin Yola and Ho Chin Siong. Understanding Vertical City Concept: Towards Sustainable City

630

Mohammad Mahdi Hosseini, Jamaludin Yaakob and Mahboubeh Rakhshanifar. Comparison between termination cluases in PWD 203A(Rev.2010) of Malaysia and GTC of Iran
 

78

Mohsen Ghasemi, Mohd Zin Kandar, Maliheh Noroozi, Alireza Taghizadeh and Sahel Namazian. Review the Effective Factors on Daylight Performance in the Atrium Buildings
 

145

Mahdi Aghaabbasi, Muhammad Zaly Shah Bin Muhammad Hussein and Yousef Karimi Vahed. A new Framework for Assessing the Transport Infrastructures, Facilities and Personnel in Disasters
 

168

Mohsen Ghasemi, Mohd Zin Kandar, Maliheh Noroozi, Mansour Nikpour and Sepideh Namaziyan. Investigating Effective Factors on Daylight Quality in Office Buildings based on the Designer’s preferences
 

329

Anahita Zendehdelan and Hamidah Ahmad. The home as place: providing people with opportunities for relaxation

387

Mohammad Pir Mohammadi, Abdullah Sani Ahmad, Mohsen Roshan and Gurupiah Mursib. Sustainablity Development through Passive Energy Efficiency Design Practices in Malaysia

490

Mansour Nikpour, Hesamaddin Sotoudeh, Seyed Nima Moeinzadeh, Zahra Ghomeshi and Mohammad Ghomeshi. Creating Sustainability in Commercial Spaces; a Case of Iranian Traditional Bazaar
TOP
Science
 

473

Atikah Mohd Sani, Nor Haniza Sarmin, Noor Aishikin Adam and Siti Norziahidayu Amzee Zamri. Implementation of the Wallpaper Groups on Triaxial Patterns
 

215

Rasaq Bolakale Salau and Mohamed Noor Hasan. Preliminary investigation of Malaysian foods for sourcing essential mineral micronutrients
 

49

Mohsen Aghaeiboorkheili, Ali Hassan Mohd Murid and Mohamed M S Nasser. Solving Laplace Equation with Mixed Boundary Condition via an Integral Equation with the Generalized Neumann Kernel on Simply Connected Regions
 

69

Jamo Usman Hassan, Zainal Arffin Ahmad and Mohammad Zaky Noh. CHEMICAL AND MINERALOGICAL PROPERTIES OF RICE HUSK ASH (RHA)
 

139

Jamo Usman Hassan, Zainal Arffin Ahmad and Mohammad Zaky Noh. The effects of the Addition of Palm Oil Fuel Ash on Porcelain composition
 

184

Teh Sheen-Jeff, Sin Yew-Keong, Chan Kah-Yoong and Law Tai-Wenn. Synthesis of zinc oxide colloidal spheres by sol-gel method
 

268

Rui Sih Lim, Rohanin Ahmad and Su Hoe Yeak. History Tracting Ability of Second and Fourth Orders Runge-Kutta in Solving Delay Differential Equations
 

421

Rosita Zainal, Nor Muhainiah Mohd Ali and Nor Haniza Sarmin. GAP Computation On Certain Homological Functors of Some Finite Groups
 

439

Siti Norziahidayu Amzee Zamri, Nor Haniza Sarmin, Atikah Mohd Sani and Noor Aishikin Adam. MODELLING OF TUDUNG SAJI WEAVING USING FINITE GROUPS
 

465

Liyana Amalina, Tony Hadibarata and Abdull Rahim Mohd Yusoff. Biodegradation of Reactive Black 5 by White-rot Fungi
 

509

Sarfraz Salim and Ali H.M. Murid. Solving Mixed Boundary Value Problem in Bounded Doubly Connected Region via an Integral Equation with the Generalized Neumann Kernel

551

Afrouz Baharvand, Alias Mohd Yusof, Hadi Nur and Rusmidah Ali. Gold Nanoparticles Encapsulated in Anatase TiO2
 

86

Sanaa Mohamed Saleh Omer Omer, Nor Haniza Sarmin Sarmin, Ahmad Erfanian Erfanian and Kayvan Moradipour. The probability that an element of a group fixes a set of size two for some finite 2-groups
 

150

Shuhaida Ismail and Ani Shabri. Time Series Forecasting Using Support Vector Regression For Canadian Lynx Data
 

419

Adnin Afifi Nawi, Nor Muhainiah Mohd Ali, Nor Haniza Sarmin and Samad Rashid. The Schur Multiplier of Pairs of Groups of Order p and pq
 

594

Maryam Jahandideh Khangheshlaghi and Hamid Kazemi Esfeh. Some results on the number of edges of non – commuting graph of a finite group
 

27

Binta Jume Hadi, Mohd Marsin Sanagi, Mohammed Abdullahi Mu’azu, Wan Aini Wan Ibrahim and Shajarahtunnur Jamil. Microwave Extraction of Curcuma Domestica val.

45

Najeba Salih and Mohamad Jaafar. DETERMINE THE INFERTILITY BY NATURAL RADIOACTIVITY OF ALPHAEMITTERS FROM THE WOMEN’S URINE IN THE NORTH OFKURDISTAN-IRAQ

75

Masood Rezaei Dasht Arzhandi. Preparation of Porous PVDF/Montmorrilonite Hollow Fiber Mixed Matrix Membrane contactor via a Phase Inversion Method to Capture CO2
 

289

Afrouz Baharvand, Alias Mohd Yusof, Hadi Nur and Rusmidah Ali. Fabrication of Ag/C Core/Shell Structured Particles Via Hydrothermal Approach
 

355

Norzita Ngadi and Wong Syie Luing. Solubilisation of Low Density Polyethylene (LDPE) for Pyrolysis
 

438

Khoo Li Peng, Robiah Adnan and Maizah Hura Ahmad. Regression Parameter Estimation in the Presence of Heteroscedastic Error and Outliers in Multiple Linear Regression
 

480

Samad Zare and Zulkafli Othaman. Review Fabrication III–V semiconductor nanowires: MOCVD system
 

43

Fahimeh Ahmadi, Safa Jami, Mozhde Heydarianasl, Shadab Dabagh and Rosli Bin Hussin. Correcting Decoherence Error by Measuring the Environment in Phase Damping Channel
 

52

Victor Okolobah and Zuhaimy Ismail. Electricity Peak Load Analysis Based on Empirical Mode Decomposition
 

67

Ragheed Yacoub and Nurul Bahiyah Ahmad Khairudin. Comparative Modeling of Human Sweet Taste Receptors: T1R2-T1R3
 

146

Farhad Ali, Ilyas Khan, Sami Ulhaq and Sharidan Shafie. MHD FREE CONVECTION FLOWS OF MHD BRINKMAN TYPE FLUIDS
 

172

Kabiru Mohammed, Prof. Mohamed Rusli Abdullah, Prof. Ikeh Eugene I, Dr Aziah Ismail, Dr Julia Omar, Prof. Joseph Popoola Fabiyi and Assoc. P Sevia M Idrus. Epidemiological study of Urinary schistosomiasis due to schistosoma haematobium among children in Wamakko town,Sokoto state,North-western Nigeria
 

185

Azadeh Refaei, Husin Wagiran and Mohammad Alam Saeed. Thermoluminescence Response of Nd and Sm doped optical fibers to X-ray Irradiation

236

Sanaa Mohamed Saleh Omer Omer, Nor Haniza Sarmin Sarmin, Ahmad Erfanian Erfanian and Kayvan Moradipour Moradipour. The probability that an element of a group fixes a set of size two for some finite 2-groups
 

277

G. M. T. Chai, T. J. C. Hosea, I. P. Marko, Z. Batool, S. R. Jin, N. Hossain and S. J. Sweeney. Photo-modulated Reflectance Spectroscopy on InGaAsBi for Efficient Room Temperature Operation
 

467

Shokoh Parham, Fatemeh Yaghoubi Doust, Shima Shirani Lapari and Parastoo Tajik. The Adsorption Ability of Nano Alumina in the Removal of H2S and CO2 in Sour Gas

523

Somayeh Koupaeimalek, Roya Ahmadi and Maryam Jalalifard. STUDY OF CHANGES IN CHARGE/RYDBERG AND CHARGE/TOTAL RATIOS AND THE ENERGY GAP IN PROCYCLIDINC60 COMOUND WITH AB-INITIO METHODS
 

546

Nurhidaya Mohamad Jan, Wan Heng Fong, Sherzod Turaev and Nor Haniza Sarmin. Watson-Crick Petri Net
 

589

Nor Fazila Rasaruddin, Mas Ezatul Nadia Mohd Ruah, Mohamad Noor Hassan, Siong Fong Sim and Mohd Zuli Jaafar. Application of PLS Regression to Determine Iodine Value of Palm Oil Using FTIR Spectra
 

629

Parisa Pourdayhimi, Alias Mohd.Yusof and Hadi Nur. preparation of mesoporous silica sphere for modification by zinc oxide
TOP
Education

64

Reza Raissi and Faizah Bt. Mohamad Nor. A comparison between students’ and teachers’ ideas regarding Communicative Language Teaching implementation in Malaysian secondary schools; a qualitative survey

228

Ismail Abdul Fatai Olohunfunmi and Nik Suryani Nik Abd Rahman. An Exploratory study on Muslim adolescents’ awareness and views about sex education
 

344

Samireh Abedini, Ahmad Johari Bin Sihes and Hesamaddin Kamalzadeh Takhti. Student evaluation of teaching
 

406

Mohd Rozali Senik and Muhammad Nubli Abdul Wahab. A Pilot Study of The effect of Zikir On The Performance Psychology Using Heart Rate Variability (HRV)
 

412

Siew Fong Ng, Wan Fara Adlina Wan Mansor and Chai Hong Lai. Roles of Mentees via Virtual Mentoring
 

461

Mahsa Ghaderpour and Soodeh Hamzehlou Moghadam. Problem Base Learning
 

502

Seyed Mojib Zahraee, Ghasem Rezaei, Ashkan Memari, Jafar Afshar and Jafri Bin Mohd Rohani. Teaching the Design of Experiment and Response Surface Methodology Using Paper Helicopter Experiment
 

345

Ponmalar N Alagappar and Sabitha Marican. Sexual Harassment At The Workplace: Is It A Serious Problem In Malaysia?

401

Mahtab Ghadimi and Noor Abidah Mohd Omar. A Review of The Efficiency of Explicit and Implicit Error Feedback on Students’ Writing Accuracy
 

598

Asnizawati Abu Samah and Mohammed Sharif Mustaffa. Konflik Kerja-Keluarga Dan Sokongan Sosial Di Kalangan Wanita Bekerja Di Universiti Teknologi Malaysia, Skudai Johor
 

581

Zahra Bagheri, Azlina Mohd Kosnin and Mohammad Ali Besharat. Emotional intelligence has an effect on educational success: How is it possible?
 

637

Monsurah Mosaku and Moh’D Najib Abdul Ghaffar. Assessment of Higher Education Learning In the 21st Century
 

132

Fereshteh Zeynivandnezhad, Zaleha Binti Ismail, Yudariah Binti Mohammad Yusof and Bambang Sumintono. Mathematical Thinking in Differential Equations through a Computer Algebra System : a Theoretical Framework

176

Fatemeh Mirzaei. The Role of Input and Output in Second Language Learning From the Perspective of the Behaviorist, Innatist and Interactionist Views of Language Learning

264

Shifaa Abdullah and Nawal Abbas. Transparency of Political Commesives in American Presidential Inaugural Speeches: Critical Discourse Analysis perspectives
 

266

Asha Hasnimy Mohd Hashim and Ai Choo Lee. The Effects of Neuromuscular Control Training on Athlete’s Limit of Stability
 

331

Khatereh A Malekian, Mohd Tajudin Ninggal, Rezvan Allahdad and Nazanin Boujarian. Predicting Nostalgia among University Students: The Role of Attachment Styles and Personality
 

366

Samira Y. Kakh and Wan Fara Adlina Wan Mansor. The Challenges of Knowledge Sharing and Communicative Interaction on International Campus
 

376

Hana Jamal, Akram Zeki, Waleed Faris and Roslina Othman. Characteristics of Learning Styles and Educational Technology
 

385

Samira Nikian, Samira Hassani, Samira Seifi and Faizah Mohamad Nor. How do role plays activities in English classroom promote learning English.
 

398

Samira Seifi, Samira Nikian, Samira Hassani and Noor Aireen Ibrahim. Review of Current Development in the Teaching of English Grammar

402

Mahtab Ghadimi and Shivan Mawlood Hussein. A Critical Review of Communicative Language Teaching: Unity Within Diversity
 

489

Yu Mei Liew and Rohaya Mohd Nor. Engaging Contextual Approach to Understand What Contributes to Effective Health Promotion Campaigns Targeted for Rural Communities
 

506

Dewi Octaviani, Norazah Yusof and Mohd. Shahizan Othman. Analysis of E-learning Acceptance Factors Based on Delone &Mclean Information Success Model
 

522

Abbas Abdoli Sejzi, Baharuddin Aris and Chan Pey Yuh. Important Soft Skills for University Students in 21th Century
 

565

Bukhari Syed and Hamdan Said. The Need of Sustainable Initiatives for Higher Education
 

576

Rohaiza Zakaria and Aede Hatib Musta’Amal. The Development of Sketching Diary In Exploring Sketching Behaviors in Designing.

612

Abdulhafeez Muhammad and Asadullah Shah. Academic Dishonesty: An Ethical Dilemma in Technology Enhanced Education
 

624

Tengku Intan Suzila Tengku Sharif and Mohd Yusri Mohamad Noor. Linguistic Fieldwork In An Accelerating Obsolescence Digital Age
 

625

Shivan Mawlood Hussein and Mahtab Ghadimi. The effect of vocabulary knowledge on reading comprehension
 

641

Jiang Na and Farhad Balash. Utilizing Borich Model for Academic Staff Needs Assessment at UTM
 

446

Nourooz Hashemi, Mohd Salleh Abu, Hamidreza Kashefi and Khadijeh Rahimi. What are Difficulties of Learning Derivation and Integral among Undergraduate Students?

369

Wan Rusyaini Wan Mohd and Muhammad Nubli Abdul Wahab. Measuring Laziness Using Heart Rate Variability (HRV)
TOP
Management & Human resource development

92

Ishfaq Ahmed, Wan Khairuzzaman Wan Ismail and Salmiah Mohamad Amin. Role of perceived organizational support in teachers’ responsiveness and students’ outcomes: evidence from a public sector university of Pakistan
 

448

Ganiat Olatokun, Rusnaih Ahmad and Harlida Addulwahab. FEMINISTS’ BODY SENSITIVITY: WESTERN AND NIGERIAN PERSPECTIVES IDENTIFIED

597

Md Fauzi Bin Ahmad and Norhayati Zakuan. Relationship amongst TQM, Business Performance, Tools and Techniques: Qualitative Study Result
 

226

Yasin Munir, Dr. Saif Rehman Khan, Muhammad Siddique and Imran Abbas. Factors Effecting on Extra-Role Performance of Higher Eductaion Institutes of Pakistan
 

617

Hamed Ansari, Noor Azmi Bin Mohammad, Pooya Songhory and Hossein Motamed Chaboki. Investigate the effect of intellectual capital on organizational performance with emphasis on the mediating role of organizational learning capabilities: IRAN case
 

174

Sunita Rega Kathiravelu and Dr Nur Naha Abu Mansor. The Impact of Managers Role in Knowledge Sharing Culture
 

262

Yew Huei Tan and Abu Mansor Nur Naha. Motivation and employee performance among lecturers in Malaysia: The mediating effect of organizational citizenship behaivor
 

411

Zulaifah Abdul Ghani. Linking KPIs to Strategic Plans for Financial Sustainability for Non-Profit Organization
 

284

Zahra Pourabedin, Amin Nourizadeh and Dr.Noor Hazarina.Binti Hashim. e-CRM web service attributes and customer– bank satisfaction

12

Siti Sarawati Hj. Johar, Ishak Mad Shah and Zainudin Abu Bakar. The Personality and Emotional Intelligence of Leader in the Workplace

433

Hafiz Ishaq, Dr. Nur Naha Abu Mansor, Dr. Muhammad Sajjad, Muhammad Siddique and Faisal Khan. Service Quality, Customer Satisfaction and Loyalty with Mobile Operators in Pakistan
 

242

See Ying Kwok, Ahmad Jusoh and Zainab Khalifah. Value as Mediator in the Relationship between Experience and Satisfaction: A Study in Malaysia Tourism Context
 

352

Fazel Mohammadi Nodeh, Melati Binti Ahmad Anuar, Hadi Ghafoorian, Marjan Anbarsooz and Aliakbar Rafatnia. Pathology and Study of Obstacles on the way of New Instruments Application in the Islamic Banking
 

420

Afeez Sanni and Maizon Hashim. Identifying the Critical Barriers to the Implementation of Public Private Partnership Projects in Nigeria
TOP
Islamic Civilization
 

68

Khalina Khalili. The Role of the Scientist on the Object of Scientific Interest from the Perspectives of Traditional Islam
 

531

Naemah Hamzah, Mohd Ismail Mustari and Bushrah Basiron. PERKEMBANGAN KERJAYA WANITA MASA KINI DAN KEDUDUKANNYA MENURUT PANDANGAN ULAMAK KONTEMPORARI
 

542

Mohd Afifuddin Mohamad Mohamad and Nooraini Othman. RAWATAN SPIRITUAL RUQYA SEBAGAI ALTENATIF RAWATAN MODEN: SATU KAJIAN AWAL
 

560

Sakinah Ab. Rahim. CONCEPT OF SPIRITUAL FROM ISLAMIC PERSPECTIVE

602

Ismail Bin Abd Rahman and Arieff Salleh Bin Rosman. ISLAMIC BENCHMARKING: DISCOVERING COST OF CAPITAL WITHOUT INTEREST
TOP
Bioscience & bioengineering

126

Muna Hadi and Mohd Shahir Shamsir. Genetic comparison of different human population groups using internal transcribed spacer sequence
 

434

Meor Mohd Fikri Ahmad Zubir and Tony Hadibarata. Biodegradation and Metabolic Pathway of Cresol Red Dye By White-rot Fungi

25

Hajara Oyiza Yusuf. Studies on the bactericidal and fungicidal properties of aqueous extract of lemon grass (Cymbopogon citratus)
 

578

Javad Hamzehalipour Almaki, Rozita Nasiri and Fahrul Zaman Huyop. Identification of Novel Bacterial Species Capable of Degrading Dalapon Using 16S rRNA Genomic Analysis
 

189

Thowiba Sabeel, Fauzan Harun, Stephan Eluwa and Solima Sabeel. ELECTRONIC NOSE DETECTION OF URINE VOLATILE COMPOUNDS AND DETERMINATION BACTERIA AND MUCUS
 

464

Mohsen Marvi Baigi, Neda Amini, Eko Supriyanto, Shajarahtunnur Jamil and Shahpour Khangholi. Total Phenolic Content,Antioxidant and Antibacterial Properties of Scurrula.ferruginea Extracts
 

514

Najat Berwary, Shahpour Khangholi, Fadzilah Adibah Abdul Majid, Salehhuddin Hamdan and Nabil Elia Waheda. Assessment of Viral Infection Related to Type 1 Diabetes Mellitus in the Presence of HLA-DR3,DR4
TOP
Geoinformation & Real Estate
 

186

Ahmad Fuad Ab. Nasir and Maimunah Sapri. ERGONOMIC WORKPLACE AND AGEING WORKER

283

Apratim Roy. Prediction of Wind Speed Frequency Distribution for Bangladesh with Probability Functions
 

498

Mohammad Noori, Mohammad Bagher Sharifi, Mahdi Zarghami and Mohammad Heydari. Modelling of Meteorological Parameters in Golestan Province of Iran Using LARS-WG Model in the Period of 2011-2030
 

572

Shahrul Mardhiah Binti Azmi, Dr Baharin Bin Ahmad and Dr Hj Anuar Bin Hj Ahmad. APPLICATION OF QUICKBIRD AND UNMANNED AERIAL VEHICLE (UAV) FOR UPDATING TOPOGRAPHIC MAP: A REVIEW
 

605

Shehu Muhammad, Maimunah Sapri and Ibrahim Sipan. Meeting Study Space and Facilities Need of Research Students: A Survey of Malaysian Universities
 

606

Mohd Hafis Mohd Room and Anuar Ahmad. Remote Sensing, Photogrammetry, Unmanned Aerial Vehicle for Geomorphology Study: A Review
 

609

Norhadija Darwin and Anuar Ahmad. The Potential of Low Altitude Aerial Data For Large Scale Mapping
 

616

Fatin Afiqah Binti Md. Azmi and Assoc. Prof. Dr. Tahir Sabit Haji Mohammad. The Proposal for A Single Tribunal of Estates Distribution
TOP